RGP02-12e//20e prv: 1200-2000 volts lo : 0.5 ampere features: * glass passivated junction * high current capability * high surge current capability * high reliability * low reverse current * low forward voltage drop * fast switching for high efficiency mechanical data: * case : do-41 molded plastic * epoxy : ul94v-0 rate flame retardant * lead : axial lead solderable per mil-std-202, method 208 guaranteed * polarity : color band denotes cathode end * mounting position : any * weight: 0.339 gram telephone: (973) 376-2922 (212)227-6005 fax: (973) 376-8960 high voltage fast recovery rectifiers do-41 0.107(2.7) 0.080 (2.0) 1.00(25.4) min. 0.205 (5.2) 0.166(4.2) 0.034 (0.86) 0.028(0.71) 1.00(25.4) min. dimensions in inches and ( millimeters ) maximum ratings and electrical characteristics ratinq at 25 c ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20%. rating maximum recurrent peak reverse voltage maximum rms voltage maximum dc blocking voltage maximum average forward current 0.375"(9.5mm) lead length ta = 55 c peak forward surge current 8.3 ms. single half sine wave superimposed on rated load (jedec method) maximum peak forward voltage at 0.5 amp. maximum dc reverse current ta = 25 c at rated dc blocking voltage ta = 1 00 c maximum reverse recovery time ( note 1 ) typical junction capacitance ( note 2 ) junction temperature range storage temperature range symbol vrrm vrms vdc lf(av) ifsm vf |r |r(h) trr cj tj tstg rgp rgp rgp 02-12 02-14 02-16 1200 1400 1600 840 980 1120 1200 1400 1600 rgp 02-18 1800 1260 1800 rgp 02-20 2000 1400 2000 0.5 20 2.5 5.0 50 300 5.0 -65 to +150 -65to+150 units volts volts volts amps. amps. volts ha ha ns pf c c notes : (1 ) reverse recovery test conditions : if = 0.5 a, ir = 1.0 a, irr = 0.25 a. ( 2 ) measured at 1.0 mhz and applied reverse voltage of 4.0 vdc quality semi-conductors
|